Product Title
Support Video
FAQ
Documents & Drivers
Support Video
FAQ
Documents & Drivers
Support Video
How to Use T13 ANC
FAQ
App & Control
Battery & Charging
Bluetooth & Connection
Care & Others
Sound & ANC
Please turn on sleep mode in the QCY APP to avoid accidentally touching the touch area.
Update the fireware on the QCY App
Pathway: Open the QCY APP - Settings - Firmware Update - Click Update
Pathway: Open the QCY APP - Settings - Firmware Update - Click Update
1. Get the QCY App.
The QCY app is available on iOS and Android devices. It can be installed from the Google Play Store or the Apple App Store.
2. Connect the QCY earbuds with your device via Bluetooth (i.e. a smartphone or tablet)
3. Use the QCY app for enhanced product experience.
The QCY app is available on iOS and Android devices. It can be installed from the Google Play Store or the Apple App Store.
2. Connect the QCY earbuds with your device via Bluetooth (i.e. a smartphone or tablet)
3. Use the QCY app for enhanced product experience.
The app itself doesn’t normally need location access. However, when Bluetooth Low Energy (BLE) is used to find your earbuds, Android requires location permission.
If you prefer not to share your location, close the app and try pairing again.
If you prefer not to share your location, close the app and try pairing again.
1. Pair the earbuds with your phone.
2. Open the QCY app, scroll to the bottom, and click "Add Devices."
3. If "QCY T13 ANC" pops up, select it to connect.
4. If not, click "Set Up Manually" and choose "QCY T13 ANC" from the list to connect.
2. Open the QCY app, scroll to the bottom, and click "Add Devices."
3. If "QCY T13 ANC" pops up, select it to connect.
4. If not, click "Set Up Manually" and choose "QCY T13 ANC" from the list to connect.
1. Ensure the earbuds are seated properly in the case.
2. Clean the charging contacts on both the earbuds and case to ensure a proper connection.
3. If the issue persists, contact our service center.
2. Clean the charging contacts on both the earbuds and case to ensure a proper connection.
3. If the issue persists, contact our service center.
1. Make sure the earbuds are charged.
2. Check if the ear tips are installed properly.
3. If the earbuds still don’t turn on after charging, contact our service center.
2. Check if the ear tips are installed properly.
3. If the earbuds still don’t turn on after charging, contact our service center.
1. Let your headphones completely drain their battery.
2. Charge your headphones for 2 hours using a 5V charger.
2. Charge your headphones for 2 hours using a 5V charger.
Pair the earbuds with the QCY app on your phone to check the battery level.
To download the app, just search for "QCY" in your app store.
To download the app, just search for "QCY" in your app store.
T13 ANC Reset Steps:
1. Delete any unused Bluetooth connection records on your phone.
2. Place both earbuds back into the charging case. Press and hold the button on the charging case for 15 seconds (the charging case's red and blue indicator lights will flash three times alternately to indicate a successful reset).
3. Try searching and pairing again.
1. Delete any unused Bluetooth connection records on your phone.
2. Place both earbuds back into the charging case. Press and hold the button on the charging case for 15 seconds (the charging case's red and blue indicator lights will flash three times alternately to indicate a successful reset).
3. Try searching and pairing again.
No, this feature is not supported for this product.
To connect two devices:
1. Pair the earbuds with device A.
2. Disable Bluetooth on device A, and the earbuds will enter pairing mode.
3. Pair the earbuds with device B.
4. Re-enable Bluetooth on device A and reconnect to the earbuds.
After this initial setup, the earbuds will automatically connect to both devices next time.
1. Pair the earbuds with device A.
2. Disable Bluetooth on device A, and the earbuds will enter pairing mode.
3. Pair the earbuds with device B.
4. Re-enable Bluetooth on device A and reconnect to the earbuds.
After this initial setup, the earbuds will automatically connect to both devices next time.
1. Turn on Bluetooth on your phone.
2. Turn on the earbuds and remove them from the charging case.
3. Find the T13 in your phone's Bluetooth list and tap to connect.
Now you can use your Bluetooth earbuds.
2. Turn on the earbuds and remove them from the charging case.
3. Find the T13 in your phone's Bluetooth list and tap to connect.
Now you can use your Bluetooth earbuds.
Unfortunately, we do not sell earbuds separately.
We offer various ear tip sizes to ensure a good fit. To find the best fit:
1. Make sure you’re wearing the correct earbuds (check the L/R logo).
2. Try different ear tip sizes.
3. Twist the earbuds slightly to find the most secure and comfortable position.
1. Make sure you’re wearing the correct earbuds (check the L/R logo).
2. Try different ear tip sizes.
3. Twist the earbuds slightly to find the most secure and comfortable position.
1. Use your earbuds regularly to avoid battery over-discharge. Aim to use them at least once a month.
2. Charge the earbuds after each use, and don't wait until they drop below 20% to charge.
3. Open the case at least once a month to check that everything works, and charge the case monthly.
4. Clean the charging pins on both the earbuds and case regularly.
5. Keep the ear tips clean and wipe the metal mesh with rubbing alcohol.
6. If they get wet, use a hairdryer on the 'cool' setting to dry them.
2. Charge the earbuds after each use, and don't wait until they drop below 20% to charge.
3. Open the case at least once a month to check that everything works, and charge the case monthly.
4. Clean the charging pins on both the earbuds and case regularly.
5. Keep the ear tips clean and wipe the metal mesh with rubbing alcohol.
6. If they get wet, use a hairdryer on the 'cool' setting to dry them.
Cleaning the dust filter: Use a dry toothbrush to gently clean the dust filter on the earbuds. Make sure not to apply too much pressure to avoid damaging them.
Yes, just take one earbud out from the charging case to use.
If you are using two earbuds, you can put either one of the earbuds back into the charging case and continue using the other one on its own.
If you are using two earbuds, you can put either one of the earbuds back into the charging case and continue using the other one on its own.
You can try the following troubleshooting steps:
1. Adjust the ear tips: Try using different sizes of ear tips and ensure the earbuds are positioned correctly to create a tight seal. This can improve both sound quality and noise cancellation.
2. Check the audio source: Test different types of music and make sure the audio source is clear and free of distortion or noise.
3. Customize the EQ settings: Use the QCY app to try different EQ modes or customize the sound profile to suit your preferences.
1. Adjust the ear tips: Try using different sizes of ear tips and ensure the earbuds are positioned correctly to create a tight seal. This can improve both sound quality and noise cancellation.
2. Check the audio source: Test different types of music and make sure the audio source is clear and free of distortion or noise.
3. Customize the EQ settings: Use the QCY app to try different EQ modes or customize the sound profile to suit your preferences.
Manuals
Still Need Help?
Tel
+1(917)807-6754
Live Chat
Order Status
We will use your feedback in order to improve our services and elevate the overall customer experience. Thank you for your time. You can also click here to contact with our customer service