Product Title
Support Video
FAQ
Documents & Drivers
Support Video
FAQ
Documents & Drivers
Support Video
How to Use Crossky GTR2
FAQ
App & Control
Bluetooth & Connection
Care & Others
Sound & ANC
The app itself doesn’t normally need location access. However, when Bluetooth Low Energy (BLE) is used to find your earbuds, Android requires location permission.
If you prefer not to share your location, close the app and try pairing again.
If you prefer not to share your location, close the app and try pairing again.
1. Pair the earbuds with your phone.
2. Open the QCY app, scroll to the bottom, and click "Add Devices."
3. If "H3 Pro" pops up, select it to connect.
4. If not, click "Set Up Manually" and choose "QCY Crossky GTR2" from the list to connect.
2. Open the QCY app, scroll to the bottom, and click "Add Devices."
3. If "H3 Pro" pops up, select it to connect.
4. If not, click "Set Up Manually" and choose "QCY Crossky GTR2" from the list to connect.
1. Clear the pairing records between the headphones and all of the previous devices.
2. Re-pair your headphones and the device.
If that doesn’t work:
- Try pairing with another device to check for compatibility issues.
- Ensure there are no objects blocking the Bluetooth signal.
2. Re-pair your headphones and the device.
If that doesn’t work:
- Try pairing with another device to check for compatibility issues.
- Ensure there are no objects blocking the Bluetooth signal.
To connect two devices:
Step 1. Pair the headphones with device A.
Step 2. Disable Bluetooth on device A, and the headphones will enter pairing mode.
Step 3. Pair the headphone with device B.
Step 3. Re-enable Bluetooth on device A and reconnect to the headphones.
After this initial setup, the headphones will automatically connect to both devices next time.
Step 1. Pair the headphones with device A.
Step 2. Disable Bluetooth on device A, and the headphones will enter pairing mode.
Step 3. Pair the headphone with device B.
Step 3. Re-enable Bluetooth on device A and reconnect to the headphones.
After this initial setup, the headphones will automatically connect to both devices next time.
Please note that this may not indicate an issue with the headphones themselves, but could be related to the connected device or your environment. Bluetooth signals can be affected by obstacles like walls, appliances, Wi-Fi interference, and more. To ensure a stable connection, try to minimize such obstructions.
To resolve the issue, follow these troubleshooting steps:
1. Fully charge and reset your headphones
2. Check the performance by listening to downloaded music or videos to avoid potential streaming issues.
3. Test the headphones with another Bluetooth device in a different location to see if the issue persists.
To resolve the issue, follow these troubleshooting steps:
1. Fully charge and reset your headphones
2. Check the performance by listening to downloaded music or videos to avoid potential streaming issues.
3. Test the headphones with another Bluetooth device in a different location to see if the issue persists.
Update the fireware on the QCY App, Before updating:
1. Ensure your headphones have at least 20% battery.
2. Make sure both earbuds are connected to the QCY app.
3. Don’t use the earbuds during the update.
4. Keep the earbuds in the charging case with the lid open.
1. Ensure your headphones have at least 20% battery.
2. Make sure both earbuds are connected to the QCY app.
3. Don’t use the earbuds during the update.
4. Keep the earbuds in the charging case with the lid open.
Try to re-pair your headphones: Clear the pairing records on your phone, then re-pair the earbuds to your device.
We recommend trying the following steps:
- Verify that the audio output device on your phone is set to "QCY Crossky GTR2"
- If you're making the call through an app, try making a direct call using your phone's regular calling feature to check if the issue persists.
- Test your earbuds with a different Bluetooth device in a different environment to see if the problem improves.
- Verify that the audio output device on your phone is set to "QCY Crossky GTR2"
- If you're making the call through an app, try making a direct call using your phone's regular calling feature to check if the issue persists.
- Test your earbuds with a different Bluetooth device in a different environment to see if the problem improves.
You can try the following troubleshooting steps:
- Check the audio source: Test different types of music and make sure the audio source is clear and free of distortion or noise.
- Customize the EQ settings: Use the QCY app to try different EQ modes or customize the sound profile to suit your preferences.
- Check the audio source: Test different types of music and make sure the audio source is clear and free of distortion or noise.
- Customize the EQ settings: Use the QCY app to try different EQ modes or customize the sound profile to suit your preferences.
Manuals
Still Need Help?
Tel
+1(917)807-6754
Live Chat
Order Status
We will use your feedback in order to improve our services and elevate the overall customer experience. Thank you for your time. You can also click here to contact with our customer service