Product Title
Support Video
FAQ
Documents & Drivers
Support Video
FAQ
Documents & Drivers
Support Video
How to Use H3
FAQ
App & Control
Battery & Charging
Bluetooth & Connection
Care & Others
Sound & ANC
The app itself doesn't normally need location access. However, when Bluetooth Low Energy (BLE) is used to find your earbuds, Android requires locationpermission.
If you prefer not to share your location, close the app and try pairing again.
If you prefer not to share your location, close the app and try pairing again.
The app itself doesn't normally need location access. However, when Bluetooth Low Energy (BL) is used to find your earbuds, Android requires location
permission.
If you prefer not to share your location, close the app and try pairing again.
permission.
If you prefer not to share your location, close the app and try pairing again.
The earphones can only be used when connected to both the phone's Bluetooth and the app.
1. Open the QCY app, go to Settings, and tap the earphone location feature to see the earphones' exact location.
2. Tap to play a sound to locate the earphones by listening to the audio.
1. Open the QCY app, go to Settings, and tap the earphone location feature to see the earphones' exact location.
2. Tap to play a sound to locate the earphones by listening to the audio.
1. Check network signal issues, such as cellular signal/Wi-Fi signal.
2. Try not to exit the background/update page during the upgrade process.
2. Try not to exit the background/update page during the upgrade process.
1. Connect your headphones to the QcY app.
2. Go to Settings -Firmware Update.
3. Tap Update.
4. lf no firmware update is displayed, your firmware is already up-to-date.
2. Go to Settings -Firmware Update.
3. Tap Update.
4. lf no firmware update is displayed, your firmware is already up-to-date.
This could be due to incorrect charging method.
Please completely drain your earphones' battery, then recharge them using a 5V charger for about two hours.
Please completely drain your earphones' battery, then recharge them using a 5V charger for about two hours.
Pair the earphone with the QcY app on your phone to check the battery level.
To download the app, just search for "QCY" in your app store.
To download the app, just search for "QCY" in your app store.
1. Make sure the earphones are charged.
2.Check if the ear tips are installed properly.
3. lf the earbuds still don't turn on after charging, contact our service center.
2.Check if the ear tips are installed properly.
3. lf the earbuds still don't turn on after charging, contact our service center.
1. Press and hold the Multi-Funtion Button for 2 seconds to power on, the headphones will enter pairing mode automatically.
2. Turn on Bluetooth on your device.
3. Select "QCY H3" from the available device list.
2. Turn on Bluetooth on your device.
3. Select "QCY H3" from the available device list.
To connect two devices:
1. Pair the earbuds with device A.
2. Disable Bluetooth on device A, and the earbuds will enter pairing mode.
3. Pair the earbuds with device B.
4.Re-enable Bluetooth on device A and reconnect to the earbuds.
After this initial setup, the earbuds will automatically connect to both devices next time.
1. Pair the earbuds with device A.
2. Disable Bluetooth on device A, and the earbuds will enter pairing mode.
3. Pair the earbuds with device B.
4.Re-enable Bluetooth on device A and reconnect to the earbuds.
After this initial setup, the earbuds will automatically connect to both devices next time.
To reset H3:
1. Press and hold both VOL+ and VOL- buttons for 10 seconds
2. The headphones' LED will flash red 3 times, indicating a successful reset.
1. Press and hold both VOL+ and VOL- buttons for 10 seconds
2. The headphones' LED will flash red 3 times, indicating a successful reset.
The H3 supports both 3.5mm wired playback and Type-C wired playback (the included Type-C cable cannot be used for playback; a cable with data transfer capability must be used).
H3 3.5mm wired playback does not support enabling the headphone microphone.
H3 Type-C wired playback supports enabling the headphone microphone.
H3 3.5mm wired playback does not support enabling the headphone microphone.
H3 Type-C wired playback supports enabling the headphone microphone.
Use your left hand to control the earcups and your right hand to control the headphones, Rotate the earcups counterclockwise with your left hand to remove
them.
them.
1. Use your earphone regularly to avoid battery over-discharge. Aim to use them at least once a month.
2. Charge the earphone after each use, and don't wait until they drop below 20% to charge.
3. Avoid pulling on the headband of the headphones during use to prevent breakage.
2. Charge the earphone after each use, and don't wait until they drop below 20% to charge.
3. Avoid pulling on the headband of the headphones during use to prevent breakage.
You can switch between modes within the application:Path: Device --Sound -- Turn on Noise Cancellation.
Alternatively, you can switch between different modes by pressing the ANC button
Alternatively, you can switch between different modes by pressing the ANC button
Please use your phone's built-in recording function to confirm if sound can be recorded.
Do not use other apps to perform this operation, as this may disable the headset microphone.
If making or receiving calls, you need to set the default receiving device to the headset.
Do not use other apps to perform this operation, as this may disable the headset microphone.
If making or receiving calls, you need to set the default receiving device to the headset.
Experiment with different types of music and ensure that the input audio source is free of distortion or other noise
Try different EQ modes on the OCY app and customize the EQ to your liking
Try different EQ modes on the OCY app and customize the EQ to your liking
Real-time monitoring of changes in the environment and audio leakage to adjust noise-cancellation capabilities. With adaptive noise canceling, you can experience the optimal effect of noise reduction and maximum tranquility. Please note that this feature is off by default and can be enabled via the QCY app.
Manuals
Still Need Help?
Tel
+1(917)807-6754
Live Chat
Order Status
We will use your feedback in order to improve our services and elevate the overall customer experience. Thank you for your time. You can also click here to contact with our customer service