Product Title
Support Video
FAQ
Manuals
Support Video
FAQ
Manuals
Support Video

How to Use H3 Lite
FAQ
App & Control
Battery & Charging
Bluetooth & Connection
Care & Others
Sound & ANC
The app itself doesn’t normally need location access. However, when Bluetooth Low Energy (BLE) is used to find your earbuds, Android requires location permission.
If you prefer not to share your location, close the app and try pairing again.
If you prefer not to share your location, close the app and try pairing again.
1. Pair the earbuds with your phone.
2. Open the QCY app, scroll to the bottom, and click "Add Devices."
3. If "H3 Pro" pops up, select it to connect.
4. If not, click "Set Up Manually" and choose "H3 Pro" from the list to connect.
2. Open the QCY app, scroll to the bottom, and click "Add Devices."
3. If "H3 Pro" pops up, select it to connect.
4. If not, click "Set Up Manually" and choose "H3 Pro" from the list to connect.
To get more battery life from your headphones, try these tips:
- Lower the volume.
- Turn off ANC
- Disable smart features and Spatial Audio.
- Power off the headphones when you're not using them.
- Lower the volume.
- Turn off ANC
- Disable smart features and Spatial Audio.
- Power off the headphones when you're not using them.
1. Clear the pairing records between the headphones and all of the previous devices.
2. Re-pair your headphones and the device.
If that doesn’t work:
- Try pairing with another device to check for compatibility issues.
- Ensure there are no objects blocking the Bluetooth signal.
2. Re-pair your headphones and the device.
If that doesn’t work:
- Try pairing with another device to check for compatibility issues.
- Ensure there are no objects blocking the Bluetooth signal.
To connect two devices:
Step 1. Pair the headphones with device A.
Step 2. Disable Bluetooth on device A, and the headphones will enter pairing mode.
Step 3. Pair the headphone with device B.
Step 3. Re-enable Bluetooth on device A and reconnect to the headphones.
After this initial setup, the headphones will automatically connect to both devices next time.
Step 1. Pair the headphones with device A.
Step 2. Disable Bluetooth on device A, and the headphones will enter pairing mode.
Step 3. Pair the headphone with device B.
Step 3. Re-enable Bluetooth on device A and reconnect to the headphones.
After this initial setup, the headphones will automatically connect to both devices next time.
To reset H3 Lite:
1. Press and hold both VOL+ and VOL- buttons for 10 seconds
2. The headphones' LED will flash red 3 times, indicating a successful reset.
1. Press and hold both VOL+ and VOL- buttons for 10 seconds
2. The headphones' LED will flash red 3 times, indicating a successful reset.
Please note that this may not indicate an issue with the headphones themselves, but could be related to the connected device or your environment. Bluetooth signals can be affected by obstacles like walls, appliances, Wi-Fi interference, and more. To ensure a stable connection, try to minimize such obstructions.
To resolve the issue, follow these troubleshooting steps:
1. Fully charge and reset your headphones
2. Check the performance by listening to downloaded music or videos to avoid potential streaming issues.
3. Test the headphones with another Bluetooth device in a different location to see if the issue persists.
To resolve the issue, follow these troubleshooting steps:
1. Fully charge and reset your headphones
2. Check the performance by listening to downloaded music or videos to avoid potential streaming issues.
3. Test the headphones with another Bluetooth device in a different location to see if the issue persists.
When using the AUX cable, you can still enjoy ANC, but the headphones will turn off, and the Bluetooth chip will stop functioning. The main differences are:
- The app cannot connect, and EQ settings (both presets and custom) are disabled.
- AUX connection does not consume battery power, as the headphones are powered through the cable.
- There is no delay when using the AUX cable.
- The app cannot connect, and EQ settings (both presets and custom) are disabled.
- AUX connection does not consume battery power, as the headphones are powered through the cable.
- There is no delay when using the AUX cable.
Update the fireware on the QCY App, Before updating:
1. Ensure your headphones have at least 20% battery.
2. Make sure both earbuds are connected to the QCY app.
3. Don’t use the earbuds during the update.
4. Keep the earbuds in the charging case with the lid open.
1. Ensure your headphones have at least 20% battery.
2. Make sure both earbuds are connected to the QCY app.
3. Don’t use the earbuds during the update.
4. Keep the earbuds in the charging case with the lid open.
Try to re-pair your headphones: Clear the pairing records on your phone, then re-pair the earbuds to your device.
We recommend trying the following steps:
- Verify that the audio output device on your phone is set to "QCY H3 Lite"
- If you're making the call through an app, try making a direct call using your phone's regular calling feature to check if the issue persists.
- Test your earbuds with a different Bluetooth device in a different environment to see if the problem improves.
- Verify that the audio output device on your phone is set to "QCY H3 Lite"
- If you're making the call through an app, try making a direct call using your phone's regular calling feature to check if the issue persists.
- Test your earbuds with a different Bluetooth device in a different environment to see if the problem improves.
You can try the following troubleshooting steps:
- Check the audio source: Test different types of music and make sure the audio source is clear and free of distortion or noise.
- Customize the EQ settings: Use the QCY app to try different EQ modes or customize the sound profile to suit your preferences.
- Check the audio source: Test different types of music and make sure the audio source is clear and free of distortion or noise.
- Customize the EQ settings: Use the QCY app to try different EQ modes or customize the sound profile to suit your preferences.
Real-time monitoring of changes in the environment and audio leakage to adjust noise-cancellation capabilities. With adaptive noise canceling, you can experience the optimal effect of noise reduction and maximum tranquility. Please note that this feature is off by default and can be enabled via the QCY app.
Manuals
Still Need Help?

Tel
+1(917)807-6754
Live Chat
Order Status
We will use your feedback in order to improve our services and elevate the overall customer experience. Thank you for your time. You can also click here to contact with our customer service